Tutorial: DIY Reversible Bandeau

Bandeau tops are great for those extra hot summer days. I’ll show you how to make a basic elastic bandeau that is also reversible, so you can use two of your favorite fabrics. You can also use this tutorial to make a swimsuit top, making the reverse side of the bandeau out of a lining swimsuit fabric. I’ll walk you through how to create your own pattern then show you how to sew it together.

This page contains affiliate links. As an Amazon Associate, I earn a small commission from qualifying purchases. That being said, I encourage you to use your local sewing shop whenever possible, or to look for supplies second hand.

Supplies Needed:

1/4 yard of fabric
1/4 yard of contrast fabric
1/2 inch elastic

Make Your Pattern:

Measure your overbust, right at armpit level.
Measure around your underbust. (The diagram below shows this as the smaller measurement, but this may be bigger or smaller than the overbust depending on your body)
Measure the distance between the overbust and underbust, then add 2 inches. (the 1/2inch at the top and bottom will be the elastic casing)
Draw your pattern, according to the diagram below, using these measurements. (You will cut out two of these in both the main color and the lining color, so the final circumference of the fabric will be twice your measurements)
Don’t forget to add seam allowance

Step 1

sew one side of the bandeau top

With right sides together, sew just one side of the bandeau and the bandeau contrast color.

Step 2

sew the two contrast colors together on the top and bottom

With right sides together, sew the two contrast colors along the long edges.

Step 3

fold the bandeau in half inside itself and sew one side

Fold the bandeau in half with right sides together (This means it will be folded into a tube-like structure inside of itself). Then sew one half of the bandeau

Step 4

turn the bandeau right side out and press

Turn the bandeau to the right side through the open half. Then press it to make the seams nice and flat.

Step 5

add a line of stitches on both sides to form casings

Add a line of stitches 5/8″ down from the top and 5/8″ up from the bottom to form casings for your elastic.

Step 6

fold over the fabric between casings and hand sew it closed

Fold the gap in the fabric and sew up the area in between the casings. There should still be a gap for inserting elastic and the top and bottom.

Step 7

insert elastic into the top and bottom casings

Cut two pieces of elastic that are equal to your overbust and underbust measurements. Then insert them into the elastic casings. Try on the bandeau and pull the elastic until it feels comfortable and secure. Then sew it into a loop and sew up the gap.

Finished!

Tutorial: DIY Reversible Bandeau